(+971) 529164192

(+971) 65311723

mahesh@mina-alarab.com

GARNET

MINA SUPER GARNET 

SPECULAR HEMATITE

WATER JET CUTTING GARNET 

COPPER SLAG 

COAL SLAG

STEEL SHOT 

STEEL GRIT 

ALUMINIUM OXIDE 

GLASS BEADS 

ZIRCON

ABRASIVE BLAST MACHINES 

ABRASIVE NOZZLES

INTERNAL PIPE CLEANING AND COATING MACHINES

PERSONNEL PROTECTION EQUIPMENT

LIGHTING MATERIALS

CABINETS AND CLAST ROOMS

AIR TREATMENT EQUIPMENT

VACUUM RECOVERY UNITS

HIGH VOLUME MOISTURE SEPARATE /RECEIVER TANK

MEASURING AND TEST EQUIPMENT

PAINT FINISHING EQUIPMENT.

BARITE
BENTONITE API GRADE
CAUSTIC SODA, LIME, KCL
BIOCIDE
CORROSION INHIBITOR
SODIUM CHLORIDE (RAW MATERIAL -SALT)
CALCIUM BROMIDE BRINE
SODIUM BROMIDE
FIBER CELLULOSE
CALCIUM CARBONATE 6
MICA FINE, ALL GRADES
SILICA SAND & FLOUR …
IRON OXIDE …
OXYGEN SCAVENGER
MARBLE GROUND SIZED

  1. Sand Blasting Equipment
  1. Air less painting Machines Elco Meter

Elco Meter

  1. Surface Preparation QC instruments
  2. Custom Built/ Tailor Made Instrumentation & Electrical Control Panels/ Desks.
  3. Instrumentation & Electrical Calibration Test benches.
     
  1. Custom Built/ Tailor Made Instrumentation & Electrical Control Panels/ Desks.
  2. Instrumentation & Electrical Calibration Test benches.
  3. Open/ Closed Type Instrumentation Control Skids/ Racks.
  4. Modular Control Desk.
  5. Process Control/ Instrumentation Simulation Skids.
  6. E - House/Analyzer Shelter
  7. FRP Junction Boxes
  8. Electrical Panels like Transformer Cubicle, Alarm Control Panel, Distribution Panel, VFD Panel, Feeder Pillar Panel, ACB Panels, Disconnecting Switch Box, Electrical Control Panel, Lighting Distribution Board, LTMCC Panels, Metering Panels, Multi start Heavy Tension Panels, Power Control Centre (PCC), Power Distribution Box, Prewired Panels, Remote Power on Switch Gear Panels.
  9. .Instrumentation panels like Pneumatic Panels, Purge Panel, Mimic Panel, Air Headers,
  10. PLC Panels, 19" Racks, Alarm Annunciator Panels, Operator consoles, Operator Work Station, DCS Panels, Control Desk.
  11. E&I Test Benches - Compact and Integrated Multifunction, Heavy-duty C & I workstation
  12. for calibration & Testing, Loop checking & Troubleshooting of any Process Control Instruments like Sensors, Transducers, Transmitters, Indicators, Controllers, Recorders & Final Control Elements like Control Valves & Actuators
  13. Pre-Engineered, Prefabricated, Dismantling, and Reassembly type Site Offices, Project
  14. Offices, Calibration Laboratories, Storage Sheds, Waiting/Exam Halls, and Auditorium with all amenities.

Our range of product offering for surface preparation & painting

  1. Garnet
  2. Mina Super Garnet
  3. Specular Hematite
  4. Water jet cutting garnet
  5. Copper slag
  6. Coal slag
  7. Steel shot
  8. Steel grit
  9. Aluminium oxide
  10. Glass beads
  11. Zircon
  12. Abrasive blast machines
  13. Abrasive nozzles
  14. Internal pipe cleaning and coating machines
  15. Personnel protection equipment
  16. Lighting materials
  17. Cabinets and clast rooms
  18. Air treatment equipment
  19. Vacuum recovery units
  20. High volume moisture separate /receiver tank
  21. Measuring and test equipment
  22. Paint finishing equipment.

INSTRUMENTATION PRODUCTS

Pipe Fitting

Features:
Size available from 1/16″ through 2″ in wide variety of thread combinations for easy transition from one thread design to other.
Quality and reliability for instrumentation applications
Working pressures calculated in accordance with Power Piping Code ANSI B31.1 and Refiner Piping Code ANSI B31.3.
Pipe threads utilized are National Pipe Taper (NPT) as a standard and meet the requirements of ANSI B1.20.1.
Straight bodies machined from applicable ASTM bar stock and shaped bodies are machined from forgings.
Materials – 316 Stainless Steel, Brass and Steel. (Optional material upon request)
All exposed threads protected with caps to prevent damage
 

 Fittings

Tube Fitting
 

Features:
Available in numerous configurations and size up to two inches, Minaa Al Arab tube fittings are made up of four parts consisting of a body, front ferrule, back ferrule, and nut. The fitting make up with compression type two ferrule technology is leak tight and consistent as the design compensates for any tolerances in tube outer diameter, wall thickness, and material hardness.

Forged / Weld Fitting

JIC Flare Fitting

Hose Fitting

Hydraulic Fitting

Needle Valves

Features:
Sizes available from 1/8” to ½”, Working Pressure up to 6000 psig ,Temperature from -170C to 1210C with PTFE packing, Carbon Steel, SS 304, SS 316, Monel 400 and Duplex Material, Compact Design and Robust Construction, Guaranteed Performance and reliability for inline applications

Mini Valve

Screwed Bonnet Valve

Integral Bonnet Valve

Vent/Guage

Multi Port Valve

Angle Valve

Features:
Round Body 2 piece floating ball design, Sizes available from 1/8” to 2”, Working Pressure up to 2000 psig with Brass MOC and up to 3000 PSI with SS MOC,Temperature from -170C to 650C with PTFE seats and packing.
 

Ball Valves

2 Way 3000 PSI

2 Way 6000 PSI

1 Series 2 Way

1 Series 3 Way

Manifold

2 Valve Manifold
 

One Isolation valve and One Vent Valve for vent / drain
Pressure rating up to 10000 psig at 370C
Temperature rating from -540C to 2320C with PTFE packing
Screwed double bonnet assembly with metal to metal body to bonnet seal
Non Rotating Hardened metal Stem tip design to ensure positive sealing

3 Valve Manifold
 

Two Isolation valve and One Equalizing
Pressure rating up to 10000 psig at 370C
Temperature rating from -540C to 2320C with PTFE packing
Screwed double bonnet assembly with metal to metal body to bonnet seal
Non Rotating Hardened metal Stem tip design to ensure positive sealing

5 Valve Manifold

Two Isolation valves and One Equalizing valve and Two Vent valve
Pressure rating up to 10000 psig at 370C
Temperature rating from -540C to 2320C with PTFE packing
Screwed double bonnet assembly with metal to metal body to bonnet seal
Non Rotating Hardened metal Stem tip design to ensure positive sealing

Thermo Well

Machined from Bar Stock or forged material
Specialization in design and manufacture
Quality grade material and machining practises for improved surface finish
Available in variety of Material of Construction and Process Connection
Variety of shank configurations

Accessories

Guage Coks

Features:
Sizes available up to 1”
Maximum pressure up to 1000 PSI bar
Operating temperature up to 65 deg. centigrade
Offered with PTFE seal as a standard
 

Pressure Snubber

Guage Savers

Siphons

Distribution Air Headers

Flanges