GARNET

MINA SUPER GARNET 

SPECULAR HEMATITE

WATER JET CUTTING GARNET 

COPPER SLAG 

COAL SLAG

STEEL SHOT 

STEEL GRIT 

ALUMINIUM OXIDE 

GLASS BEADS 

ZIRCON

ABRASIVE BLAST MACHINES 

ABRASIVE NOZZLES

INTERNAL PIPE CLEANING AND COATING MACHINES

PERSONNEL PROTECTION EQUIPMENT

LIGHTING MATERIALS

CABINETS AND CLAST ROOMS

AIR TREATMENT EQUIPMENT

VACUUM RECOVERY UNITS

HIGH VOLUME MOISTURE SEPARATE /RECEIVER TANK

MEASURING AND TEST EQUIPMENT

PAINT FINISHING EQUIPMENT.

BARITE
BENTONITE API GRADE
CAUSTIC SODA, LIME, KCL
BIOCIDE
CORROSION INHIBITOR
SODIUM CHLORIDE (RAW MATERIAL -SALT)
CALCIUM BROMIDE BRINE
SODIUM BROMIDE
FIBER CELLULOSE
CALCIUM CARBONATE 6
MICA FINE, ALL GRADES
SILICA SAND & FLOUR …
IRON OXIDE …
OXYGEN SCAVENGER
MARBLE GROUND SIZED

  1. Sand Blasting Equipment
  1. Air less painting Machines Elco Meter

Elco Meter

  1. Surface Preparation QC instruments
  2. Custom Built/ Tailor Made Instrumentation & Electrical Control Panels/ Desks.
  3. Instrumentation & Electrical Calibration Test benches.
     
  1. Custom Built/ Tailor Made Instrumentation & Electrical Control Panels/ Desks.
  2. Instrumentation & Electrical Calibration Test benches.
  3. Open/ Closed Type Instrumentation Control Skids/ Racks.
  4. Modular Control Desk.
  5. Process Control/ Instrumentation Simulation Skids.
  6. E - House/Analyzer Shelter
  7. FRP Junction Boxes
  8. Electrical Panels like Transformer Cubicle, Alarm Control Panel, Distribution Panel, VFD Panel, Feeder Pillar Panel, ACB Panels, Disconnecting Switch Box, Electrical Control Panel, Lighting Distribution Board, LTMCC Panels, Metering Panels, Multi start Heavy Tension Panels, Power Control Centre (PCC), Power Distribution Box, Prewired Panels, Remote Power on Switch Gear Panels.
  9. .Instrumentation panels like Pneumatic Panels, Purge Panel, Mimic Panel, Air Headers,
  10. PLC Panels, 19" Racks, Alarm Annunciator Panels, Operator consoles, Operator Work Station, DCS Panels, Control Desk.
  11. E&I Test Benches - Compact and Integrated Multifunction, Heavy-duty C & I workstation
  12. for calibration & Testing, Loop checking & Troubleshooting of any Process Control Instruments like Sensors, Transducers, Transmitters, Indicators, Controllers, Recorders & Final Control Elements like Control Valves & Actuators
  13. Pre-Engineered, Prefabricated, Dismantling, and Reassembly type Site Offices, Project
  14. Offices, Calibration Laboratories, Storage Sheds, Waiting/Exam Halls, and Auditorium with all amenities.

SAND BLASTING,PAINTING EQUIPMENTS & ACCESSORIES

Our range of product offering for surface preparation & painting

  1. Garnet
  2. Mina Super Garnet
  3. Specular Hematite
  4. Water jet cutting garnet
  5. Copper slag
  6. Coal slag
  7. Steel shot
  8. Steel grit
  9. Aluminium oxide
  10. Glass beads
  11. Zircon
  12. Abrasive blast machines
  13. Abrasive nozzles
  14. Internal pipe cleaning and coating machines
  15. Personnel protection equipment
  16. Lighting materials
  17. Cabinets and clast rooms
  18. Air treatment equipment
  19. Vacuum recovery units
  20. High volume moisture separate /receiver tank
  21. Measuring and test equipment
  22. Paint finishing equipment.

BLASTING EQUIPMENTS 

ClemTec recognizes the needs of the industry and their portable abrasive blast equipment offers all the features that the professional user requires.

 

All machines are fitted with a well designed and proven single piece lt remote control dead-man system and silencer giving reduced labour cost, high efficiency of abrasive, performance and operator safety.

 

ClemTech machines are designed to be used with the wide range of accessories including a wide choice of nozzles, wet blast attachments, internal pipe cleaning devices, dust free blasting heads

 

Abrasive Matering Valves

Minaa Al Arab supplies a full range of metering valves ,Flat Sand Valve (FSV), Abrasive Control Valve (AP-7) , Steel Grit Valve (SGV) , Abrasive Membrane Valve (GVA), Micro Valve (AMV), Thompson Valve I and II (ATV), Combo Valve (ACV)

The Minaa Al Arab ATV, AMV and ACV abrasive valves guarantee unmatched performance, dependability and durability. Developed for the latest lt abrasives such as Garnet.

Using considerable less abrasives, if compared with the older type FSV valves, combined with maximum blasting productivity and reduced downtime.

The valves can easily be fitted to most major brands of abrasive blasting equipment. Our valves help you keep your competitive edge!

 

Remote Control System and Handle

Minaa Al Arab offer remote control valves for all our machines, which allows for one man operation.

Hoses and Couplings

Quality blast hose from the world’s leading manufacturer at very competitive prices.

Hose with its anti-static outer case and lightweight but though internal knitted nylon ply gives the user the best combination of wear, cost and safety benefits.

Best quality air hose is tested to three times working pressure and is available in several popular sizes.

Also available heavy duty bolted couplings to suit.

Range of quality suction and recovery hoses can be supplied with or without wire reinforcement, those without the spiral wire have a nylon helical coil. Anti-static properties are available.

Nozzles and Nozzle Holders

Tungsten  Carbidge  Nozzles

Our brand wide range of Tungsten-Carbide lined nozzles are available in both long venturi and straight nozzle format. They constitute the work horse nozzle of the industry being robust and efficient.

A full range of short straight and venturi nozzles for small diameter hoses used in cabinets or portables.

Internal diameters of ⅛" to ½" ensure that you have the nozzle to suit your particular application.

 

Nozzle Holders

The nozzle holders are available in nylon and aluminum. All types are complete with high wear, replaceable rubber gaskets.

All nozzle holders are manufactured to fit externally over the blast hose. Internal grip rings bite into the blast hose for a safe and secure fit and retaining screws provide additional holding power without penetrating the inner hose layer.

 

 

Blast Helmets and Visors

Minaa Al Arab is now able to supply the industry’s most comprehensive range of Personal Protection Equipment.

In any situation that operators have to work in, personal safety must be of paramount importance, in order to maintain productivity and operator comfort.

 

Amongst our vast range are the following groups of products:

Blasting helmets

Spares for all helmets (including lens inners, outers and intermediates).

Breathing air filters, cartridges and spares.





 

Breathing Air Filter Unit and Cartridges

Amongst our vast range are the following products:

Breathing air filters ,Spares &Cartridges

Blast Lights

Compressed Air Powered Safety Lamp

Air-turbo Lamp A-0445 provides a flood beam giving a well diffused 30° angle of light with the standard Matt reflector, or with a polished reflector, a highly concentrated spot light. The lamp has a 15 mm toughened glass lens for high impact strength and pressure resistance.

Blast light BL 100

This fully rubber blast light can be used to put in a blast room or other dusty areas. This light is 24v with a bulb of 100W

Blast Light BL 80

This rubber made blast light are easy to attach the nozzle holder and have easy exchangeable lenses. The lights can be delivered in 12V/24V and both models have a bulb of 20w.

Internal Pipe Cleaning Equipment

Internal pipe cleaning problems are quickly solved with wide range of pipe cleaning tools Designed by CLEMTEC.

 

For pipes ranging from 1/2" to 63" (13 mm to 1600 mm).

The cleaning action leaves the surface free from dust, abrasives and contaminants ready for the application of the required paint coating system. Our range of pipe cleaning tools make cleaning of both new and existing pipe installations a one man operation with complete 360 degree coverage and thus doing away with need to rotate the pipe.

 

Semi automatic hoisting system which enables the operator to pull the machine through the length of the pipe at the required speed to create the standard required in the cleaning and painting specification

 

A comprehensive range of nozzles and centering devices to suit all combinations of pipe sizes is available.

Abrasives with the grain size of 0.75 mm up to 1.00 mm are ideally suited for the equipment.

The use of aluminum-oxide and sand will cause excessive wear and are not recommended.

 

After coolers

Compressed-air conditioning is indispensable for ensuring fault-free performance of blasting and paint spraying equipment as well as for compressed air tools.

 

Conditioned compressed air contributes to improving the quality of blasted surfaces sincemost of the oil and water have been removed from the compressed air. Conditioned air improves productivity, reduces maintenance and lowers operating costs

 

The most prevalent contaminant in compressed air is water.  Water, in the form of vapor, enters the air systemat the compressor intake,  and is concentrated to the saturation point by compression. As cooling occurs downstream of the compressor, the moisture in this saturated air condenses into harmful liquid water.

 

Abrasive Blasting Equipment

How the pneumatic remote control system works
 

The remote control enable the operator to start or interrupt blasting from a remote position and is a safety equipment to prevent accidents.
The pneumatic remote controls consist of a remote control valve RM-100 or RM-50, a dead-man handle and a twin line hose. The red remote control hose guides compressed air from the remote control valve to the dead-man handle. When the dead-man handle is depressed, the air passes from the red to the blue hose and is guided back to the remote control valve. The pot is pressurized and the blast process starts. When the dead-man handle is released, the blast process stops (the port is De pressurized).

Blast Cabinets

Minaa Al Arab is setting the standard for optimum performance and operation in modern blast cabinets.
There are two working principles, vacuum injection and pressure blasting.
For all cabinets Clemtec is the absolute market leader in its price class.
Innovative construction and application of advanced components guarantee a perfect system. All models proved their value for many years.
 

Venturi Blowers and Jet Fans
 

Compressed air or saturated steam is the power source for this air mover.
It operates on the venturi principle whereby you take small volumes of high velocity air (from the compressed air source) through the casting and out the nozzle jets, creating a venturi action or pulling action that induces large volumes of low velocity air through the venturi and out the air diffuser.
A 1½" hose is recommended from your air supply source to the side inlet connection. The compressor size required can be determined by checking the chart on air consumed at various inlet pressures. Operate this air mover on air or steam lines limited to 140 PSI.
 

Portable Air Vacuum Recovery System (Airvac SK III)

An air operated vacuum system for removal of spent abrasive from inaccessible or enclosed areas such as storage tanks, box girder constructions, ships hulls etc. This small and lightweight unit is an efficient, cost effective alternative to traditional manual bucket and shovel operations. The portable design and lightweight nature make this a popular choice for difficult site conditions. Recovery rates of up to three tonnes an hour of expendable abrasive are capable when coupled to an air supply of 250cfm.
 

Shot Blasting Machine Filter Bags

Reverse pulse dust collectors use filter cartridges which are cleaned whilst the collector is in operation ensuring the efficiency of the collector is maintained. A short pulse of air causes the dust accumulated on the cartridges to fall into collection bins below at pre-determined intervals keeping the cartridges clean whilst the collector is in operation. Reverse pulse dust collectors can be used with high specification filters on hazardous dust applications and can be operated in conjunction with secondary or HEPA filters for increased efficiency.
 

PAINTING  EQUIPMENTS 

Airless Painting Machine
 

The  King UK airless range is easy to maintain and has proved highly popular with multi-unit and single-unit user alike. It is generally accepted that for re-ability, versatility and speed of operation airless spraying is the best method of applying anti-corrosive coatings, including alkyds, chlorinated rubbers, polyurethanes, high-build epoxies, protective and decorative materials.

Airless Spray Guns
 

XTR guns, Silver guns, Contractor guns, Flex Silver guns, Delta HVLP guns,Alpha AA guns

Spray Tips and Guards

Standard flat tips, RAC 5 switch tips, XHD RAC tips, Pro LTX tips, Pro WR tips, Fine finish airless spray tips , Alpha AA tips, Adjustable airless spray tips,Standard AA automatic spray tips, AA RAC spray tips


 

Filters

Paint Spray Hoses and Couplings

 

A high pressure, high performance, airless paint spray hose specially designed to meet the exacting requirements of the industry. Steel braid reinforcing insures strength and guarantee electrical conductivity.
This hose offers optimum resistance to a wide range of fluids including paints, chlorinated solvents and other chemicals.
The hoses are fully compatible with Handock's range of airless and air-assisted paint spray pumps and with most other common makes of paint spray equipment.
 

Pipe Coating Equipment

In operation a rotating head, powered by an air motor throws paint by centrifugal force at an evenly metered flow against the surface. Pipe coater is manually pulled through the pipe at a per-determined speed based on paint film thickness and type of coating.

Pipe coater-I for internal diameter sizes from 4" to 7" (90 - 180 mm).
Pipe coater-II for internal diameter sizes from 7" to 38" (180 - 950 mm).

Cooperate-III is an economy model for pipes in the range 3" to 35" (75 - 900 mm).
 

Paint Helmets

Minaa Al Arab is now able to supply the industry’s most comprehensive range of Personal Protection Equipment.
In any situation that operators have to work in, personal safety must be of paramount importance, in order to maintain productivity and operator comfort.
Amongst our vast range are the following groups of products:
Spray painting masks and hoods,Breathing air filters, cartridges and spares,
Spare lenses inners, outers and intermediates,Paint suits, gloves etc.

Protective Paint Clothing

Leather Gloves,Leather/Cotton/Tyvek, Overalls,Leather/Cotton Blouses,Cotton Trousers , Cotton/Tyvek Hoods