OUR PRODUCTS

GARNET

MINA SUPER GARNET

SPECULAR HEMATITE

WATER JET CUTTING GARNET

COPPER SLAG

COAL SLAG

STEEL SHOT

STEEL GRIT

ALUMINIUM OXIDE

GLASS BEADS

ZIRCON

ABRASIVE BLAST MACHINES

ABRASIVE NOZZLES

INTERNAL PIPE CLEANING AND COATING MACHINES

PERSONNEL PROTECTION EQUIPMENT

LIGHTING MATERIALS

CABINETS AND CLAST ROOMS

AIR TREATMENT EQUIPMENT

VACUUM RECOVERY UNITS

HIGH VOLUME MOISTURE SEPARATE /RECEIVER TANK

MEASURING AND TEST EQUIPMENT

PAINT FINISHING EQUIPMENT.

BARITE
BENTONITE API GRADE
CAUSTIC SODA, LIME, KCL
BIOCIDE

SODIUM CHLORIDE (RAW MATERIAL -SALT)
CALCIUM BROMIDE BRINE
SODIUM BROMIDE
FIBER CELLULOSE
CALCIUM CARBONATE 6
MICA FINE, ALL GRADES
SILICA SAND & FLOUR …
IRON OXIDE …
OXYGEN SCAVENGER
MARBLE GROUND SIZED

Sand Blasting Equipment

Air less painting Machines Elco Meter

Elco Meter

Surface Preparation QC instruments
Custom Built/ Tailor Made Instrumentation & Electrical Control Panels/ Desks.
Instrumentation & Electrical Calibration Test benches.

CHEMIN Controls & Instrumentation Private Limited.

Custom Built/ Tailor Made Instrumentation & Electrical Control Panels/ Desks.
Instrumentation & Electrical Calibration Test benches.
Open/ Closed Type Instrumentation Control Skids/ Racks.
Modular Control Desk.
Process Control/ Instrumentation Simulation Skids.
E - House/Analyzer Shelter
FRP Junction Boxes
Electrical Panels like Transformer Cubicle, Alarm Control Panel, Distribution Panel, VFD Panel, Feeder Pillar Panel, ACB Panels, Disconnecting Switch Box, Electrical Control Panel, Lighting Distribution Board, LTMCC Panels, Metering Panels, Multi start Heavy Tension Panels, Power Control Centre (PCC), Power Distribution Box, Prewired Panels, Remote Power on Switch Gear Panels.
.Instrumentation panels like Pneumatic Panels, Purge Panel, Mimic Panel, Air Headers,
PLC Panels, 19" Racks, Alarm Annunciator Panels, Operator consoles, Operator Work Station, DCS Panels, Control Desk.
E&I Test Benches - Compact and Integrated Multifunction, Heavy-duty C & I workstation
for calibration & Testing, Loop checking & Troubleshooting of any Process Control Instruments like Sensors, Transducers, Transmitters, Indicators, Controllers, Recorders & Final Control Elements like Control Valves & Actuators
Pre-Engineered, Prefabricated, Dismantling, and Reassembly type Site Offices, Project
Offices, Calibration Laboratories, Storage Sheds, Waiting/Exam Halls, and Auditorium with all amenities.

LIST OF PRODUCTS

Our range of product offering for surface preparation & painting

Garnet
Mina Super Garnet
Specular Hematite
Water jet cutting garnet
Copper slag
Coal slag
Steel shot
Steel grit
Aluminium oxide
Glass beads
Zircon
Abrasive blast machines
Abrasive nozzles
Internal pipe cleaning and coating machines
Personnel protection equipment
Lighting materials
Cabinets and clast rooms
Air treatment equipment
Vacuum recovery units
High volume moisture separate /receiver tank
Measuring and test equipment
Paint finishing equipment.

Mina Minerals India Private Limited (Abrasives)

GARNET

NON-METALLIC ABRASIVES

Garnet is a naturally occurring silicate mineral deposit, reddish/pink in color and it is mainly used as an abrasive in abrasive blasting & water jet cutting and also as an absorbent in water filtration. Garnet is one of the most effective, safe, and versatile abrasive media for abrasive blasting and has a hardness on the Mohs scale of 6.5 to 7.5.

As an abrasive media, Garnet is highly efficient due to its low dust emission, and where conditions allow, it can be recycled upto 5 times and used as an economical alternative to Aluminium Oxide, Steel Shot & Grit, or any other expendable abrasives.

View PDF Order Guide: Abrasive Blast Media – Garnet Sand

Categories: Abrasives, Garnet

Tags: Abrasive Blast Media, Garnet Sand, Non-Metallic Abrasive

METALLIC ABRASIVES

Steel Grit is an angular blast media ideal for aggressive cleaning applications. Steel Grit is designed for quick and effective removal of many types of surface contaminants from steel and other foundry metals. It is softer than other blast media and is less likely to fracture. The angular nature of steel grit produces an etched surface on metal for superior adhesion of paint, epoxy, enamel, rubber, and other coatings.

Typical applications include reparation of metal surfaces prior to subsequent coating, surface profiling, profiling prior to rubber bonding and lining, removal of sand from castings, descaling of bars and strips, etc. Industry users include blasting/painting contractors, container manufacturers, shipbuilders, pipeline manufacturers, plant maintenance, and steel fabricators.

View PDF Order Guide: Abrasive Blast Media – Steel Grit

Categories: Abrasives, Steel Grit

Tags: Abrasive Blast Media, Metallic Abrasive, Sandblasting, SSW, Steel Grit, Ukraine

STEEL GRIT

ALUMINIUM OXIDE

NON-METALLIC ABRASIVES

Aluminium Oxide is an angular, durable and long-lasting blasting abrasive which can be recycled many times, it is the most widely used abrasive grain in sandblasting finishing and surface because of its cost, longevity and hardness. Hardness than other commonly used blasting materials, aluminium oxide penetrates and cuts even the hardest metals and sintered carbide.

Approximately 50% lighter than metallic media, aluminium oxide abrasive has twice as many particles per pound. The fast-cutting minimizes damage to thin materials by eliminating surface stress caused by heavier, slower cutting media.

Brown Fused Aluminium Oxide have a low friability, so it will break down slowly and coarser sizes can be recycled and reclaimed.

White Fused Aluminium Oxide have a high friability but has the same hardness rating (in general) as Brown Aluminium Oxide. It will thus shatter on impact and break down quickly, without doing as much damage/impact to the substrate.

View PDF Order Guide: Abrasive Blast Media – Aluminium Oxide

Categories: Abrasives, Aluminium Oxide

Tags: Abrasive Blast Media, Aluminium Oxide, BFA, Brown Fused Alumina, Sandblasting, WFA, White Fused Alumina

COPPER SLAG

NON-METALLIC ABRASIVES

OMGRIT Copper Slag is produced from metallurgical slags and provides fast blast-cleaning rates. The hardness and high density of copper slag give it a high resistance to fracture with very low dust formation during blasting, as well as faster blast cleaning speed when compared to other slag abrasives.

Typically, the majority of its comparison is iron oxide and silicon dioxide, formed when molten slag is quenched in cold water. This cooling process fractures the slag into coarse and angular particles, making it an ideal abrasive blasting slag with optimal blasting properties.

OMGRIT Copper Slag is approved by the major shipyards, oil & gas companies, paint manufacturers, coating contractors, tank builders, pressure vessel fabricators, offshore yards and construction chemical manufacturers. This abrasive is used to remove the contaminants, paints, rust, etc., and also to clean the steel tanks.

View PDF Order Guide: Abrasive Blast Media – Copper Slag

Categories: Abrasives, COPPER SLAG

Tags: Abrasive Blast Media, Copper Slag, Non-Metallic Abrasive, Sandblasting

COAL SLAG

NON-METALLIC ABRASIVES

Coal Slag is a boiler slag, which is a recycled product from coal-burning plants. When coal is fired at over 2500 degrees, it melts and produces a by-product called slag. When is slag is cooled through a process called vitrification, it crystallizes, forming sharp, angular granules in a variety of sizes.

This slag is then reclaimed and undergoes several screening processes to remove dust and unburnt coal. The remaining crystals are then graded based on their sizes.

View PDF Order Guide: Abrasive Blast Media – Coal Slag

Categories: Abrasives, COAL SLAG

Tags: Abrasive Blast Media, Coal Slag, Non-Metallic Abrasive, Sandblasting

STEEL SHOT

METALLIC ABRASIVES

The key features of our Steel Shots are high durability, resistance to impact fatigue, and maximum cleaning efficiency. When manufactured, these steel shots have a rigidity of 40 – 51 HRC (390 – 530 HV). These have a low breakdown rate and hence no dust is formed in the process. As these distribute high-impact energy, these are taken into use in the industries needing heavy cleaning, making bright finishes.

ADVANTAGES

Ideal for peening application to impart a clean, smooth, and polished finish.
Used to impart compressive strength to torque or load-bearing metal parts such as crankshafts, engine turbine blades, and heavy-duty springs in a peening application.
Both air-powered and wheel blast systems can be used to accelerate the steel shot onto the surface of the part.
Can be recycled as many as 3000 times before replacement due to its hardness and density.
Generates a minimal amount of dust in the blasting process.

View PDF Order Guide: Abrasive Blast Media – Steel Shot

Categories: Abrasives, Steel Shot

Tags: Abrasive Blast Media, Metallic Abrasive, Sandblasting, SSW, Steel Shot, Ukraine

GLASS BEADS

NON-METALLIC ABRASIVES

Glass Beads are manufactured from lead-free, soda lime-type glass, containing no free silica that is made into preformed round, ball shapes. They produce a much smoother and brighter finish than angular abrasives. Glass beads blasting produces a clean, bright, peened, satin finish, without dimensional change of the parts. Chemically inert and environmentally friendly, glass beads are an acceptable method of metal cleaning or surface finishing when properly controlled.

ADVANTAGES

Wide range of grades available for different jobs and profiles.
Non-reactant will not interfere with coatings.
No dimensional change to the surface and no embedded contaminants or residue left on the material.
Smoothly blends away surface defects and improves corrosion resistance.
No detectable crystalline silica.

View PDF Order Guide: Abrasive Blast Media – Glass Beads

Categories: Abrasives, Glass Beads

Tags: Abrasive Blast Media, Glass Beads, Graco LineLazr, Line Striping, Non-Metallic Abrasive, Road Marking, Sandblasting, Titan PowrLiner